FAQs
You are here: Information Centre / FAQs
Know what you’re looking for?
Click one of the links below to see relevant Frequently Asked Questions.
General Questions
Incineration is the method of waste disposal through combustion. And here at Waste Spectrum, our incineration systems are a clean, cost effective and bio-secure method to dispose of animal waste and animal by-products, general waste and medical waste.
Waste Spectrum Incineration Systems are one of the longest-serving incinerator manufacturers in the industry, covering agricultural, medical, and municipal waste and we have pioneered the development of industry-wide legislation.
Behind our machines are over 25-years worth of UK manufacturing, expertise and market-leading technology. We constantly strive to make the best even better and this has won us numerous awards.
We are a proud British manufacturer, supplying the world with robust and reliable incineration systems.
So if you value trust and honesty, speak to the experts.
• Our incinerators work by creating extremely high temperatures, causing waste products to combust and in turn, reduce into a waste ash. Comprising of two chambers; a main chamber that reaches temperatures of 750 Degrees Celsius and an after chamber that exceeds temperatures of more than 850 Degrees Celsius, our machines can effectively and securely transform various waste types, such as animal by-products, general waste and medical waste into a bio-secure ash.
• A Waste Spectrum incinerator is a truly unique incineration system.
• We utilise a monolithic casting technology within our machines, something that is truly unique to the Waste Spectrum brand. Comprising of strategically placed metal anchors, insulation board and poured concrete, our monolithic casting is a more efficient and effective way in which to line an incinerator. As our machines reach extreme temperatures, the steel fabrications expand and contract; our monolithic system allows the concrete to move with the steel fabrication. And unlike any other system, this prevents damage to the machine and provides an overall greater user experience, reaching greater temperatures without posing a risk to the machines integrity.
• At Waste Spectrum, we also use a unique hearth bar system, that increases the overall efficiency of our machines. Hearth bars increase the amount of oxygen able to circulate around the items being incinerated, which in turn creates a more efficient burn rate.
There are several benefits of choosing incineration over other forms of waste disposal, many of which have a direct and positive impact on the end user.
• Our incineration systems are bio-secure, so in the event of a disease outbreak; fallen stock and items that have come into contact with diseased livestock can be disposed of efficiently, quickly and in a bio-secure manner.
• Incineration is a clean waste disposal solution.
• Waste can be disposed of as and when necessary.
• Additionally, incineration is cost effective, as it is cost effective to run and eliminates the necessity to outsource waste disposal with expensive outside agencies.
Waste Spectrum are committed to reducing the amount of general waste going to landfill and provide a cost-effective and efficient alternative. Incineration is the safest and easiest method of general waste management.
Yes, between our international Business Development Representatives and our network of global distributors we can ensure our machines can be delivered anywhere around the globe.
Waste Spectrum are an are an official member of the Association of Private Pet Cemeteries and Crematoria, and we can be found on their directory of official per crematoria suppliers.
A Waste Spectrum Incineration System can be designed to run on a preferred fuel type:
Diesel
Nat Gas
LPG
A Waste Spectrum Incineration System is a robust and reliable machine, designed to withstand extreme weather conditions and climates. However, we do suggest some form of shelter or building is utilised to ensure the longevity and durability of our machines. In recent years, we have also begun to offer containerised solutions to some of our machines, making them compact and enclosed.
Technical Questions
If your burner or fan is not running, this could be for various reasons. Here are a few things you can do to try and get it started again.
• Check if the burner has power
• Check the chamber temperature to see if the fan run setpoint has been reached
• Check the fan housing to see if there are any debris
• Using a digital voltmeter, check if there is power on pins 1 & 2 on the burner.
• Consider replacing the burner controller
Should none of these work, it’s best to call a Waste Spectrum Engineer.
When the burner is starting but there is no flame visible or the burner is in ‘Lockout’ there may be a few causes.
• Check and make sure you have sufficient fuel and make sure it is flowing to the burner
• Make sure fuel is reaching the burner nozzle, there could be a blockage in the feed pipe. You may need to clear a lockage or replace the nozzle.
• Check to see if the Solenoid become magnetic during start-up by placing a screwdriver close to it. It may need replacing if it does not.
• Is a spark visible on the ignition electrodes during start-up? Make sure the electrodes and leads are clean and intact. Check the ignition transformer is free from lumps or blisters. Replace elements as required.
Consider some of these steps, and if you have no luck contact a Waste Spectrum Engineer.
If your burner will ignite but then goes into lockdown shortly after producing a flame you may need to follow one of these steps – alternatively you should contact a Waste Spectrum engineer.
• Try removing and cleaning the photocell
• It may be necessary to replace the burner control box
• Check the blinding relay operation
• Remove the photocell and expose it to good natural light or a torch
• You may need to replace the photocell
If your burner flame is smoking, this is not something to worry about. Try some of the below tricks and if you have no luck turn it off and contact a Waste Spectrum engineer for advice.
• Start by cleaning the burner and all its parts – dirt can burn and create smoke
• Remove the burner nozzle and check its cleanliness – give a clean or replace if necessary
• Try increasing the burners air setting
• Increase the burner fuel pressure
Cleaning the burner is a vital part of the ongoing maintenance of your incinerator and its quite simple. Try and do this after ever third burn. Here are some simple steps, but you can refer to you User Manual to find out more.
• Only clean when the burners are cold
• Ensure that power is turned off and isolated
• Remove the blast tube
• Use a scouring pad to gently clean the diffuser, blast tube, fins, and brass part of the nozzle – be careful not to push dirt into the nozzle opening, this can cause damage.
Throughout the life of your machine it will inevitable be necessary to replace the burner control box at some point in its long life. This is simple following the few steps below.
• Remove the burner cover
• Using a suitable screwdriver, release the clips on both sides of the controller base
• Pull firmly to disconnect it from the base
• Place the controller & follow these steps in reverse.
Photocell replacement is simple and easy following these few steps.
1. Locate and disconnect the existing photocell on the side of the burner body behind the firing head
2. Connect the two wires to terminals 11 & 12 in the base of the control box.
If a burner nozzle becomes blocked or damaged it may require replacement, follow these few simple steps.
• Only use the box spanner provided for this operation
• Take care not to damage the electrodes
• Refer to the User Manual to observe best practice
Should you need to adjust the fuel pressure to the burner you will need to speak to a Waste Spectrum engineer or refer to the User manual for further guidance.
In the event you need to adjust the air flow on your burners please refer to the guidance provided in the user manual or contact a Waste Spectrum engineer for support.
Throughout the life of your machine the concrete within can take quite a beating. Sometimes this can lead to cracks and chips. Here is some guidance on the best ways to care for your concrete and some tips on what to do if you notice cracks.
Our refractory concrete will give good and long service if it is taken care of and looked after. We recommend checking the surface and cleaning it ever 3 months. Cleaning will help to reduce the build-up of ash and other debris left from the burning process.
Be careful when cleaning so not to be too rough or use abrasive tools that may cause damage to the refractory surface – this can reduce the life of the concrete & the quality of the burn. We find that a stiff brush is normally all that is required. Should you struggle to remove debris with this type of tool, have a chat to our team before trying something that could cause damage.
As the monolithic casting system utilises just a simple pour of refractory concrete to line our machines, it is normal to see some small signs of cracking during the life of the machine. This is because of the expanding and contracting of the concrete as it heats and then cools.
Sales Questions
Here at Waste Spectrum, we have a team of dedicated Business Development Representatives, each with a unique insight into the needs of our clients around the globe.
Please do not hesitate to get in touch, give us a call on +44 (0)1905 362 100 or send us an email to info@wastespectum.com and a member of our team will be in touch with you.
Investing in a Waste Spectrum sheep incinerator allows for immediate and bio-secure disposal of sheep carcasses. This in turn reduces the risk of cross-contamination and eliminates the risks associated with fallen stock collection, such as vermin, water and soil contamination. From both a bio-security and financial standpoint, Waste Spectrum incinerators may lower overheads and, in turn, increase profits. To maximise your efficiencies, all our sheep incinerators come equipped with our world-leading highly efficient pulse fire burner systems and dual-chamber technology as standard.
Making our customers happy underpins everything we do. One of the best ways in which we do this, is by providing a service for custom-built incinerators. Our experienced design team and expert engineers will work closely with you to ensure we meet your specific requirements. Whether you have a target burn rate, ideal capacity, or alternative mobility method; we can accommodate your needs.
Improper treatment of poultry waste can result in the spread of animal disease, land and water pollution, and the spread of vermin, all of which can result in the loss of livestock. Investing in a Waste Spectrum poultry incinerator eliminates the need for other expensive waste disposal methods, such as fallen stock collection, allowing you to quickly and immediately dispose of your poultry waste. From a financial and bio-secure standpoint, Waste Spectrum incinerators significantly lower overheads and in turn, increase profits. As a by-product, farmers are left with only 1 to 3% sterile ash which can in most cases be spread back on the land.
Waste Spectrum’s incinerators are available in mobile and static models, and our exceptionally sturdy units are perfect for use wherever and whenever they are needed.
Waste accumulation is a growing problem across the globe. As natural processes are converting landfill waste into highly dangerous matter, authorities and businesses are supporting alternative methods of waste disposal. Here at Waste Spectrum, having worked closely with DEFRA, we understand the concerns you have. Landfill options are becoming increasingly expensive and decreasingly bio-secure. The risk and repercussions of contamination at your site is not one worth taking. We are committed to reducing the amount of general waste going to landfill and provide a cost-effective and efficient alternative. Incineration is the safest and easiest method of general waste management.
We have a variety of machines that are perfectly suited to the disposal of mixed and municipal waste. Our team of incineration experts will work alongside you to establish which machine is best for your waste disposal needs, dependant on the quantity of waste you are looking to dispose of and the frequency of which you will need to dispose of waste.
Yes, a Waste Spectrum Incineration System is a bio-secure, quick, clean, and effective method to safely dispose of infected fallen livestock
Yes, between our international Business Development Representatives and our network of global distributors we can ensure our machines can be delivered anywhere around the globe.
If you are in the UK, yes you will need to obtain permission from DEFRA for a low capacity machine and the application process and form is a relatively straight forward procedure. Our team will be able to assist you throughout this process and help you to complete all documentation to ensure that you are applying for the correct legislation. As all cremation units sold in the UK require a permit. You will also be required to have a site visit from The AHVLA (Animal health and veterinary laboratories agency), who will again ensure your site is set up and conforms to required standards. All Waste Spectrum machines are DEFRA approved.
If you are one of our international clients, licensing and legislation is dependant upon your local governing bodies. The Waste Spectrum team are as equally versed an able to assist you with any planning or applications that may need filling out, in order to ensure you are able to obtain the correct permissions to procure your pet cremation licensing.
Still unsure?
If we haven’t answered your question, why not ask our support team? Click the button below, fill out the form and we’ll do our best to reply in 24 – 48 hours.