Hurikan 700 G

The Hurikan 700 G is a DEFRA ‘Type Approved’ extra-large top loading incinerator ideal for managing the disposal of general waste generated by businesses and households. All models in the Hurikan Range are supplied with integral secondary chambers and fully conform to EU By-Products Regulation (ABPR) (EC) No 142/2011.

Designed, engineered and manufactured at our Worcester production facility in the UK the Hurikan 700 G is built using our market leading unique hearth bar technology. With an impressively large main incineration chamber, the Hurikan 700 G has above and below hearth burners and can hold a significant amount of general waste in one load. The Hurikan 700 G has a proven capability of managing high capacity throughputs of all organic or inorganic waste streams except stone, steel or glass. Due to the nature of the waste streams and dependent upon local legislation, it may be necessary to include additional emissions control as this falls under IED (formally known as WID) regulations, if this is required then Waste Spectrum can provide you with further information plus energy recovery options, if required. The Hurikan 700 G mobile system can be trailer or skid mounted.

The Hurikan 700 G is available as a static or mobile unit and with a burn rate of up to 700kg* per hour, this model provides an excellent solution for when a rapid biosecure disposal solution is required.

*Higher burn rate requirements may be achieved through our custom-built service.

Ideally suited for:

  • Hotel waste
  • Remote camp waste
  • Domestic waste
  • Manufacturing waste
  • Community waste
  • Municipal waste (MSW)
  • Mining waste

Machine Construction

Integral to each model in the Hurikan Range is the unique Waste Spectrum monolithic casting system:

  • Ensures maximum strength and reliability in comparison to bricked linings
  • Materials expand and contract at the same rate as opposed to bricks and mortar
  • Prevents animal fats penetrating the lining which prolongs the life of the incinerator
  • Insulating board is used to reduce heat loss
  • Maintains an even working temperature for the refractory
  • Our Stainless Anchor System maintains the integrity of the lining


  • E­asy operation, full training provided
  • Mechanical or manual loading possible
  • Fully automated and remote controlled top-loading door Open/Close/Clamp operation
  • Market leading unique hearth bar technology allows for fast and complete incineration
  • Pulse fired burners, above and below hearth maximises throughput. 6 burners in main chamber; 2 above hearth & 4 below hearth
  • High Capacity up to 700kg / hr burn rate enables fast disposal of waste
  • Ash doors, as standard, allows fast and efficient ash removal whilst in operation removing downtime
  • Temperature controlled pulse fired burners for optimal efficiency
  • Low thermal mass linings for minimal heat loss
  • Supplied with higher grade concrete to withstand increased temperatures and the abrasive nature of general waste
  • Fully programmable touch screen HMI control panel with automatic burner shut off function and rapid ignition pulse fired burners for low running costs
  • Remote monitoring of the Control system, enabling Waste Spectrum to support and monitor the incinerator during operation
  • Multiple channel thermocouple data logger built in to PLC
  • Can be loaded whilst in operation maximising the inherent thermal efficiency of our monolithic lining
  • A stainless steel, single skin exhaust stack is supplied as standard
  • Available as a static or mobile system
  • Mobile system is supplied with fuel tank, generator, safety platform ladder, storage facility and ash rake
  • Electrical Supply – mobile version supplied with a generator. Static option works on a single phase 16 Amp 230 volt supply, fitted with a 3 pin round Euro plug

Standard Optional Extras

  • Additional chimney sections

Fuel Options

Diesel*, Kerosene*, LPG, Natural Gas and Bio Gas (*mobile only)


Dependent upon local legislation and regulatory guidelines pertaining to the country in which the incinerator will be operating in, it may be necessary to include additional emissions control and planning permission may be required due to its high capacity status, please contact us to discuss your requirements further.

Our commitment

With more than two decades of design, engineering and manufacturing at Waste Spectrum our technical and sales teams have a reputation for working hard to support each and every customer. From choosing the right model through to assisting with technical advice and ongoing day to day engineering support, we are proud to share our expertise.

Our knowledge and experience of a wide range of industries enables us to work closely at every stage of the planning and installation process.

For more information please call 01905 362100 to speak with one of our specialist teams.


All Waste Spectrum incinerators come with a *2 year warranty as standard.
*2 years or 2080 hours

  • This field is for validation purposes and should be left unchanged.
  • True

    British Flag



  • Over

    25 Years

    Industry Experience

  • Complete



  • Guarantee


    On all sites

  • Reliable


    Distribution Network

Quality & Reliability, Cast in our Concrete